top of page

Simcenter: SPEED, Motorsolve and MAGNET 2022.1. Precision, flexibility and connectivity.

New updates to Simcenter Electromagnetism Solutions (EMAG) greatly accelerate your ability to model complex problems with minimal time and effort. These updates further integrate Simcenter EMAG solutions so that the speed benefits of 2D solutions can streamline the process of a user needing physics into a full FE solver.


New enhancements to Simcenter SPEED, Simcenter Motorsolve, and Simcenter MAGNET with the 2022.1 updates include:


🧩 Model Complexity


The enhanced DXF overlay in Simcenter SPEED allows you to automatically see your parameter updates. With just a few clicks and no DXF refills, you can create a facsimile of your engine from a model.


The new Step-Skew option for rotor or stator topologies in Simcenter Motorsolve more accurately models potential manufacturing processes for skew. This new tilting method simulates more accurate “cogging torque.”



Topologia do rotor com uma inclinação escalonada
Rotor topology with a stepped skew

⏩Go faster


Launch your software and build a new engine project in very less time. Creating a new engine is 37% faster due to Simcenter Motorsolve response time updates.


🔎 Explorar as Possibilidades



The new preview mode for the FEA calibration in Simcenter SPEED allows you to view your model and make adjustments before submitting the job to the solver.





The effect of eddy currents on velocity.

Eddy currents can induce a breaking effect that can be both desired and undesired. Therefore, it can be essential to model the impact of eddy currents in Simcenter MAGNET.


Accounting for motion-induced “eddy currents” in actuators was not available in Simcenter MAGNET’s previous ROM technology but is now in this latest release.



🌐 Fique integrado


It is now possible to complete an EMAG data exchange for computational fluid dynamic (CFD) thermal studies with the improved data file exchange. To achieve this integrate, Siemens made across the EMAG software family including but not limited to:


Plots showing the temperature dependence of permanent magnet material.

Temperature-dependent data exchange for materials is now available in Simcenter SPEED GoFER’s for Simcenter MAGNET and Simcenter STAR-CCM+. This is helpful because, for the best FEA results, appropriate temperatures and temperature-dependent material properties for each component of the motor are essential.


Similarly, additional coil-side phase winding descriptions have been added to Simcenter SPEED PC-IMD, allowing you to define more detail in your simulation and provide crucial parameters for a Simcenter MAGNET and Simcenter STAR-CCM+ simulation.


Updates that improve your motor’s portability into Simcenter Star-CCM+ are not limited to Simcenter SPEED anymore: the xgdf data exchange format to STAR-CCM+ can now be written from Motorsolve as well. Additionally, the new end winding exports now available in Simcenter Motorsolve make it possible to export Simcenter Motorsolve motors including detailed end winding to Simcenter STAR-CCM+ and MAGNET 3D.


The four exportable end winding options in Simcenter Magnet

👁‍🗨 Demonstration


The updated end winding portability allows the user to benefit from the easy-to-use and rapid design tools in Simcenter Motorsolve and then export the results into Simcenter STAR-CCM+. In this video, you are shown how easy it is to modify your end winding design (including Idealized, Sprial, Helical, and Single tooth end windings) and export your design to STAR-CCM+.


Know more:


157 views0 comments

Comments


bottom of page